Installation Guide & Tips

The following guidelines and video links are provided for informational purposes only. IronBedTruck does not own or host any third-party videos. Always follow the installation instructions included with your specific product. For complex installations, professional installation is strongly recommended.

Before You Begin

Important: We recommend having automotive parts installed by a qualified professional. Improper installation can damage your vehicle, void manufacturer warranties, and create safety hazards. IronBedTruck is not responsible for damage or injury resulting from improper installation.

General Tools You May Need

Socket set (metric and standard)
Torque wrench
Drill and drill bits
Screwdrivers (Phillips and flathead)
Allen wrench set
Jack and jack stands
Safety glasses and gloves

Safety First

Always work on a level surface
Use proper jack stands — never rely on a jack alone
Disconnect the battery before any electrical work
Wear safety glasses and gloves
Read all instructions before starting
Have a helper for heavy or bulky items

Installation Tips by Category

Bed Covers & Tonneau Covers

Difficulty: Easy to Moderate | Time: 30–60 minutes | Professional Install: Optional

Clean truck bed rails thoroughly before installation
Most covers use no-drill clamp systems
Center the cover before tightening clamps
Test operation before final tightening

🎥 Watch BAKFlip Installation Videos | Watch TruXedo Installation Videos

Running Boards & Steps

Difficulty: Moderate | Time: 1–2 hours | Professional Install: Recommended

Most use existing frame mounting points
Use thread locker on all bolts
Torque to manufacturer specifications
Check tightness after 100 miles

🎥 Watch AMP Research Installation Videos | Watch Westin Installation Videos

Towing & Hitches

Difficulty: Moderate | Time: 1–2 hours | Professional Install: Recommended

Verify hitch class matches your towing needs
Torque all bolts to manufacturer specifications
Test wiring connections before towing

🎥 Watch CURT Hitch Installation Videos

Toolboxes

Difficulty: Easy | Time: 30–60 minutes | Professional Install: Optional

Position box before drilling or clamping
Use rubber gaskets to protect bed rails
Ensure lid seals properly before final tightening

🎥 Watch Dee Zee Toolbox Installation Videos

Floor Liners

Difficulty: Easy | Time: 10–15 minutes | Professional Install: Not required

Remove existing floor mats before fitting
Ensure liner clips or anchors are properly seated
Check that liners do not interfere with pedals

🎥 Watch WeatherTech Floor Liner Videos | Watch Husky Liners Videos

Bed Racks & Cargo Systems

Difficulty: Moderate | Time: 1–2 hours | Professional Install: Optional

Plan rack position before drilling or clamping
Use all provided hardware and torque to spec
Check load ratings before use

🎥 Watch Thule Installation Videos | Watch Yakima Installation Videos

After Installation

Re-torque bolts after the first 100–500 miles
Inspect mounting points regularly
Clean and lubricate moving parts as needed
Touch up paint on steel components to prevent rust

Disclaimer

Video links are provided as a convenience and reference only. IronBedTruck does not own, control, or take responsibility for third-party YouTube content. Videos may change or be removed at any time. Always follow the instructions included with your product. IronBedTruck is not liable for damage or injury resulting from installation errors.